0755-27502933 
Company philosophysaving, efficient, harmonious and pragmatic
|
|
|
|
|
|
|
Product
PRODUCT  service
 
Product menu
YC-903 series of drum polymer (solid) capacitor automatic aging sorting machine
    Publish time 2019-07-23 15:17    

一, The equipment profile

YC-903 series of drum-type polymer aging machine - is our company for lead-type polymer (solid) capacitance developed by a aging test equipment; the equipment used by our company's latest research and development of the fifth generation of mechanical feed, To ensure the stability of the machine and the stability of the equipment, simple Chinese user interface, simple, easy to understand and easy to operate, can greatly improve production efficiency and reduce unnecessary waste and labor costs.
1, the aging temperature: in the room temperature to 125 ℃ within the free set;
2, the device weight about 2500KG
3, the device size (area): 3300mm (L) × 2850mm (W) × 2100mm (H)
4, the total power of about 10KW equipment, the normal production of the average operating power ≤ 6KW

, The scope of adaptation:

Equipment model

Product shell number

Aluminum height

Production voltage

The number of racks

Number of clamps

Number of products carried

Thickness of partition

Aging power supply

YC-903A/05-06

Ф5-6

5-14mm

1-160V/3A

160

50 only

8000 only

2.0 mm

segment

YC-903B/08-10

Ф8-10

7-14mm

40 only

6400 only

3.0 mm

Instrumentation indicators

1, the capacity test range: 0.01μF ~ 10000μF; test accuracy: ± 1%
2, the loss angle: 0.001-0.999, the test accuracy: ± 1.0% ± 1 word;
3, capacity test frequency: 120Hz, 1KHz (2 kinds) can be set alone;
4, leakage current test range: 0.005μA-9999μA, test accuracy: ± 1% ± 0.2μA, two leakage test;
5, ESR test range: 0.01mΩ-999kΩ, test accuracy of ± 1.0%, ESR test frequency: 1K / 10K / 20K / 100K Hz can be set alone;

三, The working principle:
1, the product guide needle shaping and do polarity detection, open circuit, short circuit and reverse polarity detection; exclude open circuit, bending feet, short circuit and reverse pole products;
2, the product into the oven for high temperature by the linear power supply charging aging;
3, the product after the discharge cooling, the aging product is not detected, will exclude the aging products;
4, the product after discharge capacity and loss of the angle test;
5, the product after the discharge by the "ESR" test;
6, the product recharging about 40 seconds after the leakage current test;
7, the test results are: good products, poor capacity, high loss, large leakage, high impedance and re-seized goods;
8, the machine using standard instrumentation test, which can effectively improve the accuracy of the parameters;
9, equipment with data acquisition function;
10, remote access to the relevant parameters of the machine, with the company "ERP" system docking;
11, the machine conveyor clip with the latest generation of products, can effectively guarantee the service life;

, the equipment performance:

Models

YC-903A/05-06

YC-903B/08-10

Stalls out of the material
Time (minutes)

80

100

120

140

160

80

100

120

140

160

Go in and out every minute
Number (only)

100

80

66

57

50

80

64

53

45

40

1, the number of incoming and outgoing materials for the "test run" the actual number of minutes per minute, the error within ± 2;
2, the user can according to their own characteristics of the product stalls to select the product to ensure that the aging effect.
3, leakage test power and charging power and not aging Charging power and test power are used to establish an independent way to effectively ensure the accuracy of product testing.

五, The use of environmental conditions:
1, using three-phase five-wire AC380V ± 5% 50Hz / 10KVA power supply;
2, the use of ambient temperature: room temperature;
3, the characteristics of the guarantee range: 23 ± 5 ℃, 45 ~ 75% RH;
4, need to use pressure ≥ 0.35MPa compressed air.





Expressway
Contact us
Products
About us
News
XML 地图 | Sitemap 地图