0755-27502933 
Company philosophysaving, efficient, harmonious and pragmatic
|
|
|
|
|
|
|
Product
PRODUCT  service
 
Product menu
YC-806 series of drum-type high-pressure aging machine
    Publish time 2019-07-23 15:13    

一、Introduction to equipment
   YC-806YC-806 series of drum-type high-pressure aging machine - is our company for small high-pressure (Ф6-10) production of aging equipment; the device uses automatic preset boost mode for automatic booster high temperature aging, the default authority to be authorized Password operation, to avoid misuse of the hidden dangers; the biggest feature of the machine to maximize energy savings, the normal production of energy consumption ≤ 6KW; equipment to fully mechanized operation design, breaking the traditional aging equipment to be equipped with compressed air to run the limitations Equipment operation is more stable; simple Chinese operation interface and a strong industrial control system, so that data collection, analysis is more simple and convenient, greatly improve production efficiency.
1, the aging temperature: in the room temperature to 105 ℃ within the free set;
2, Dimensions: 3700mm (L) × 1858mm (W) × 1750mm (H);
3, the device weight about 1500KG;
4, the total power of about 10KW equipment, the normal production of the average operating power ≤ 6KW.

二、Adaptation scope

Equipment model

Product shell number

Aluminum height

Production voltage

The number of racks

Number of clamps

Number of products carried

Thickness of partition

Aging power supply

YC-806A

Ф6-8

7-20mm

250-550V

160 only

75 only

12000 only

2.4 mm

8 segment

YC-806B

Ф8-10

11-25mm

250-550V

160 only

60 only

9600 only

3.0mm

8 segment

Instrumentation indicators
1, the capacity of the test range: 0.01uF-19.9mF within the test accuracy of ± 0.5%;
2, the loss angle: 0.001-0.999, the test accuracy of ± 1.0%;
3, capacity test frequency: 100Hz, 120Hz, 1KHz (3 kinds) can be set alone;
4, leakage current test range: 0.005μA-9999μA, test accuracy of ± 1.0%, two leakage test;
5, ESR test range: 0.01mΩ-999MΩ, test accuracy ± 1.0%;
6, ESR test frequency: 1K, 10K, 20K, 50K, 100K can be set alone;
7, test data preservation: not less than 1 year, the user can be required according to the data into other storage devices, so that forever preserved;
8, test reports: built-in software can export summary report data, compatible with Excel for the second analysis;
三, the working principle:
1, the product guide needle shaping and do polarity detection, open circuit, short circuit and reverse polarity detection; exclude open circuit, short circuit, bending feet and anti-polar products;
2, through the aging of the product of the precise control of the product into the first paragraph, the aging voltage can be set to the highest aging voltage of 70-80%, to ensure product safety
        Under the premise of greatly compressed the product of the boost time and improve the aging rate of the product;
3, the product recharging about 40 seconds after the leakage test;
4, the product after the discharge cooling, the aging product is not detected, will exclude the aging products;
5, the product after discharge capacity and loss of the angle test;
6, (this function is optional function) product discharge and then "ESR" test;
7, the product by a special material extraction system out of the material, put an end to the fixture caused by the possibility of mixed products into the possibility; test results: good products, poor capacity,
High loss, large leakage, high impedance and heavy seized goods;
, the equipment performance:

model

YC-806A

YC-806B

Stalls out of the material
Time (minutes)

120

150

200

240

120

150

200

240

Go in and out every minute
Number (only)

100

80

60

50

80

65

50

40

1, the user can according to their own characteristics of the product stalls to ensure that the aging effect of the product to select the stall requirements.
2, the test voltage: test charging voltage and short circuit test voltage are set up in an independent way, effectively guarantee the product testing accuracy.
五, the use of environmental conditions:
1, using three-phase five-wire AC-380V ± 5% 50Hz / 10KVA power supply;
2, the use of ambient temperature: room temperature;
3, the characteristics of the guarantee range: 23 ± 5 ℃, 45 ~ 75% RH.




                                                                        

Expressway
Contact us
Products
About us
News
XML 地图 | Sitemap 地图